Stuff for sale

[Zmanm3]

The time has come to sell a few things I have collected.

The dash pieces I got from Psfirster, I changed my mind on the project I was going to do.
$110 Shipped for all the pieces. May be willing to part them out if the price is right.
http://i283.photobucket.com/albums/kk284/zmanm3/DSC00927.jpg

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00928.jpg

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00929.jpg

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00930-1.jpg

The Thrump_rrr PM-3001 S197 Saleen Extension Arm; a great piece if you have a Saleen S/C. I had trouble using it but I believe it is all due to my engine setup and who built the engine and not a problem of the part itself. There is a bit of a nick on the pulley but it should in no way affect the operation of the part itself.
$100 shipped, a savings of shipping and $80.

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00940-1.jpg
http://i283.photobucket.com/albums/kk284/zmanm3/DSC00941-1.jpg
http://i283.photobucket.com/albums/kk284/zmanm3/DSC00943-1.jpg
http://i283.photobucket.com/albums/kk284/zmanm3/DSC00944-1.jpg
http://i283.photobucket.com/albums/kk284/zmanm3/DSC00942-1.jpg

Steering wheel I bought off a member on the site. I had planned on painting it along with the dash pieces but I'm not going that route any more.
$225 shipped.

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00939-1.jpg

I have 2 lighting 90mm MAF I will let them go for $20 a piece shipped.

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00938-1.jpg

Saleen 6 speed shift ball, great upgrade for those of you running a Tr6060 or a T56. I just liked the red billit UPR shift ball I got better because it matched my car color.
$30 Shipped.

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00948-1.jpg

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00949-1.jpg

Mustang horse emblem 5 speed shift ball. Won't work with the 05+ shift arm threading. I think this is for a Fox body Mustang.
$25 shipped.

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00950-1.jpg


Ok Ladies and Gentlemen, all this stuff is in good condition and worked great when on my car. I'm already giving a great deal on this stuff so please don't try to nickel and dime me to death with it. I prefer Paypal and won't ship anything until I receive payment. Ask those who have bough from me I will get your item out to you quick, usually the next day after I receive payment. If I can check my email while I'm at work (this assumes I'm not crazy busy) I may even be able to get it out the same day.

[Zmanm3]

Finally I have my 1 piece drive shaft from The Drive Shaft Shop. It is steel and weighs about 25 pounds. Much lighter then the stock one. I had NO vibration with this piece at any RPM. It was installed for me by Kevin and Josh at PMP and they did a good job. I recommend an adjustable upper control arm when using this so that you can get the correct pinion angle.
$300 and YOU pay shipping.

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00932-1.jpg

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00933-1.jpg

http://i283.photobucket.com/albums/kk284/zmanm3/DSC00934-1.jpg

[MarcSpaz]

Man, I wish I had some cash for the Thump Racing pulley. I have been wanting to buy one for awhile.

Good luck... if I get some cash and you still have it, I will give you a buzz for sure.

[2k05gt]

Dibs on the MAF..